Skip to content
jestem modelką bielizny, a to 5 najładniejszych trendów jakie posiadam
May 25, 2022 by wtnwh

Controlling Sky+ from your PC and the Internet – review

Controlling Sky+ from your PC and the Internet – review
May 25, 2022 by wtnwh

submission by Paul Gale – following a post by one of the members of the UKHA_D mailing list, I recently purchased a home brew product that enables control of a sky or Sky+ box from a PC (Windows or Linux) and ultimately, the Internet. I’ve been searching for something to do this for years so thought I’d share my findings with my fellow HAers.

Joseph Heenan is the man who developed this box and the software. A bank transfer and a couple of days later I had one of his dual output boxes in my grubby mitts.

The box has a USB connector at the end of a short lead, two RF connectors (although the box is available with one as standard) and a red LED to show when it’s connected to the PC. This box enables the PC to send remote commands to the sky box through RF2, the RF connector on the back of sky and Sky+ boxes. The result is exactly the same as if you just pressed a button on the remote but without the associated problems and possible unreliability of IR transmission. It also makes home Automation control of one or two boxes a breeze. even much more excitingly is the possibility of finally being able to easily control a sky box from the Internet, something Tivo owners have long enjoyed. OK, so this is already possible by using an IR distribution system and controller such as HomeVision, but this is a much simpler and less expensive way of doing it offered you have a PC available.

The official software that Joseph supplies is as follows (taken from his web site):

Command line utility for linux and Windows to control sky/sky+ box

Script to integrate with mythtv on linux

Windows and Linux cgi scripts to enable control of sky+ through Internet (you’ll need a TV card as well)

Example prototype visual basic application for controlling sky box from Windows

At the time of writing, I’ve only evaluated the Windows command line utility and the Windows CGI scripts (installed on a Windows Apache server). The other items are available but I can’t vouch for what they’re like or how well they work.

Windows Command Line utility – After receiving the box, the first thing I did was to search a large stack of boxes for a suitable RF cable television – RF cable televisions are a rare sight in this high tech house! Plugging the USB connector into the PC resulted in the automatic install of a ‘USB human interface device’, no chauffeurs needed. The LED reassuringly glowing red.

Next came the first test – the command line interface. The command line interface is pretty easy and follows the syntax:

sky-usb-control.exe 0 12 1

This simply sends a ‘1’ to a Sky+ box on output 1 (shown by the ‘0’).

A full list of all remote codes are supplied for both the sky and Sky+ boxes, an example of some other codes are:

8: 12 8
9: 12 9
sky: 12 128
key_tvguide: 2 204
up: 12 88

I typed in the example shown above and hello presto, a ‘1’ appeared on the Sky+ TV output. Dobry start.

Internet control – As discussed above, there are also a set of CGI scripts to enable Internet control of a Sky/Sky+ box. The setup for this is a little much more complex but I still had it working in around 20 minutes. This requires several items to be installed on a Linux/Windows PC:

A TV or video capture card

Apache web server software

Activestate Perl software

The CGI scripts and associated support files (SkyWeb)

I had a couple of old Hauppauge ‘WinTV’ cards lying around so I installed one of these in one of my home Automation PC’s. I had two choices of PC, one being my main Windows 2003 Server and the other, my Geovision CCTV server. As the Windows server was full to bursting, I chose the Geovision machine. I was a little concerned at first that the specialist Geovision CCTV video capture card might interfere with the WinTV card but all went smoothly. I also installed the Windows WDM chauffeurs available from the Hauppauge web site.

Next came the Apache and Activestate Perl software installation. I’ve never installed the Windows versions before and was pleasantly amazed how easy the whole process was – just by following the default install options. The whole install took just a few minutes.

The last step was to copy the two SkyWeb directories across to the Apache install directory. There was just one variable to change in the main CGI script (text file) to set which output to use on the controller. In my case, however, this didn’t need changing.

All installation done, I excitedly (is that sad?) opened an IE window and typed in the relevant address. The following screen greeted me:

It wouldn’t take too much effort to change the still image get for a streaming feed using one of the numerous streaming video software packages around. maybe my next task?Clicking buttons on the picture of the Sky+ remote sent the relevant command to the Sky+ box and updated the still image in the video window a second later. Fantastyczny! The one second delay between pressing a button and the video screen updatingJest potrzebny, aby umożliwić aktualizację Sky + Box – szczególnie niezbędny, gdy w ekranach przewodnika telewizyjnego, gdy planista może być nieco wolny do aktualizacji. Opóźnienie jest regulowane w skrypcie CGI, ale po krótkim testowaniu zostawiłem go na 1 sekundę, która wydawała się optymalna. W użyciu opóźnienie nie jest zbyt duży problem i jest to z pewnością użyteczne.

Jak widać z ostatniego ekranu, strona internetowa może skończyć z odrobiną uwagi. Po kilku godzinach pracy przewróciłem następującą skórę, aby związać się z moimi stronami internetowymi HA. Zrobiłem nową grafikę dostępną dla Józefa, chce ich używać.

Następujący strzał pokazuje użycie kontrolera:

Dla mnie to z pewnością jeden z tych “musi mieć” kawałki sprzętu HA, oprócz kontroli internetowej, będę teraz w stanie korzystać z kontrolera zamiast mojego flakowego sterowania IR, który zazwyczaj wymaga kilkakrotnie sekwencji. Interfejs XAP byłoby też dobre. W momencie pisania, aby zobaczyć skrypt Linux MythTV, chociaż też nie używałem MythTV.

Ok, prawdopodobnie pytam, ile zapłaciłem – dobrze w wersji podwójnej produkcji, w tym wysyłkę, zapłaciłem 47,50 GBP. Wersja pojedyncza wyjścia wynosi 5 GBP tańsza – myślę, że okazja. Joseph obecnie ręka buduje tylko kilka z tych urządzeń w tygodniu i sprzedaje je w serwisie eBay, chociaż wyraził zainteresowanie budowaniem większej liczby, jeśli wie, że będą sprzedawać. Naprawdę świetne urządzenie! Kupuj kogokolwiek?

Więcej informacji można znaleźć na stronie internetowej programisty: www.heenan.me.uk

Chcieć więcej? – Śledź nas na Twitterze, jak my na Facebooku lub subskrybuj naszą kanał RSS. Możesz nawet dostać te historie dostarczane przez e-mail, prosto do skrzynki odbiorczej każdego dnia

Udostępnij to:
Facebook
Świergot
Reddit.
LinkedIn.
Pinterest
E-mail
Więcej

Whatsapp.
Wydrukować

Skype.
Tumblr.

Telegram
Kieszeń

Previous articleSentrypadNext article Biorąc moje urlopowe pozdrowienia na wyższy poziom z wydawnictwem papierowym

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Random Posts

  • Rozszerzenie limitów administracji pracy z innowacjami firmy
  • Publiczny, osobisty lub hybrydowy: Która chmura jest dla Ciebie najlepsza?
  • Drayton mądrzejszy mądry kontrola ogrzewania Ocena Część 4 – 1 rok starsza i mądrzejsza
  • Smart House Week 2019 – Wywiad nr 1 Abbie Byrom z Samsung SmartThings
  • Wywiad: Kelly Wearstler
  • Studium przypadku: 8 luksusowych inteligentnych mieszkań w Henley
  • [Sponsor] Reasenet Monday’s Wise House Stopy dyskontowe
  • Wskazówki dotyczące malowania drzwi zewnętrznych po wymianie
  • Loxone ujawnia, że ​​Nano Io Air Plus Touch dla Nano
  • Hollywood Haunt Roberta Pattinsona
SaturnWP WordPress Theme